High tensile strength and tear resistance.
Excellent durability.
Outstanding low-temperature stability.
High resistance to leachate
and other chemicals.
Fusion joints are tested during installation, ensuring
no leakage occurs at the seams.
A product extruded and manufactured with a uniform thickness and maximum width of
7m by adding UV stabilizers (carbon black) and antioxidants to high-density polyethylene (density ≥ 0.94).
Due to the topographical characteristics of most domestic landfills, where slopes are steep, this product is designed to integrate HDPE sheets
with bentonite mats for slope stability.
HDPE resin is applied onto the HDPE sheet to provide friction properties without altering its physical characteristics.
This product is manufactured by pre-bonding a protective filter mat to the barrier sheet.
The filter mat prevents movement and flotation under water caused by waves or other conditions, protecting the sheet from damage by riprap.
It also enhances ground adhesion and prevents deformation of the barrier sheet during the dumping of quality soil after installation.
| Test Item | Unit | Standard | |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) | g/10min | Less than 1.0 | |
| Density | g/cm3 | ≥ 0.940 | |
| Carbon Black Content | % | 2.0 ~ 3.0 | |
| Carbon Black Dispersion | Grade | All 10 samples must be Grade 1, 2, or 3, with at least 8 samples being Grade 1 or 2 | |
| Tensile Properties | Yield Tensile Strength | MPa | ≥ 15 |
| Break Tensile Strength | MPa | ≥ 27 | |
| Yield Elongation | % | ≥ 12 | |
| Break Elongation | % | ≥ 700 | |
| Tear Resistance | N/mm | ≥ 125 | |
| Puncture Resistance | N/mm | ≥ 320 | |
| Low-Temperature Brittleness | - | No failure at -40℃ | |
| Dimensional Stability | % | Within ±2% in all directions | |
| Environmental Stress Crack Resistance (ESCR) | h | ≥ 1,500 | |
| Oxidation Induction Time (OIT) | Standard Condition | min | ≥ 100 |
| Pressurized Condition | min | ≥ 400 | |
| OIT Retention After Thermal Aging | Standard Condition | % | ≥ 55 |
| Pressurized Condition | % | ≥ 80 | |
| OIT Retention After UV Exposure | Pressurized Condition | % | ≥ 50 |
| Seam Strength | Shear Strength | N/mm2 | ≥ 13.5 |
| Peel Strength | N/mm | ≥ 9.7 | |
Liners and covers for municipal landfills, hazardous waste sites, and coal ash impoundments to prevent leachate from reaching soil and groundwater.
Liners for reservoirs, canals, drinking water storage, sewage sludge ponds, and floating covers for treatment tanks to reduce evaporation and algae.
Lining heap leach pads, tailings ponds, and solution ponds to contain chemicals and prevent environmental pollution.
Liners for irrigation ponds, fish/shrimp farming ponds, and water storage tanks.
Waterproofing for tunnels, pipelines, and dams, and as barriers in embankments to stop seepage.
Secondary containment for storage tanks and lining frac water storage ponds.
Liners for ornamental ponds, water features
GOLDENPOW Co., Ltd. CEO: Jinseop Shim Head Office: 412, Samseong-ro, Gangnam-gu, Seoul Business Registration No.: 312-81-19153
Tel: +82-2-554-4655 Fax: +82-2-554-5364, +82-2-566-0267 Email: goldenpow@goldenpow.com
Cheonan Plant: 15, Garyong-gil, Seonghwan-eup, Seobuk-gu, Cheonan-si, Chungnam Tel: +82-41-581-6522 Fax: +82-41-581-0424
Iksan Plant: 38, Samgi Nonggongdanji-gil, Samgi-myeon, Iksan-si, Jeonbuk Tel: +82-63-858-0572 Fax: +82-63-858-0433
